Why does the CO2 laser cutting machine lose power? How can we solve this problem?
A： Why does the CO2 laser cutting machine lose power:
1. The output lens is damaged: The output lens of the laser cutting machine will wear out after long-term use, resulting in a decrease in reflectivity, which in turn leads to a decrease in output power.
2. The optical path is not on the right track: If the optical path is not set correctly, the laser cannot be fully focused, which will cause power loss.
3. Aging of the laser tube: The laser tube has a limited service life, and power loss will occur if the service life exceeds the predetermined life.
4. The water cooling effect of the laser cutting machine is not good: The cutting head part of the laser cutting machine consumes a lot of energy. If the water cooling system has a poor cooling effect, the laser tube cannot achieve the ideal cooling effect, which is easy to cause power loss.
B. How should we solve this problem? :
1. Replace the output lens: Clean and maintain it in time or replace the output lens.
2. Calibrate the optical path: According to the instructions for use of the cutting machine, calibrate the optical path to solve the problem of power loss of the cutting machine.
3. Replace the laser tube: If the laser tube has exceeded its service life and aged, it needs to be replaced in time.
4. Check the water cooling system: Regularly check the water cooling system of the laser cutting machine to ensure normal cooling effect.
